半导体实验室超纯水去离子机10L

Product Details:

1. Full automatic self-washing;

2. Cut off the water intelligently if leaking;

3. Poor water quality indication;

4. Multi-protection and two types of water connector,which could provide both Level Ⅰ water and Level Ⅲ water for labs;

5. Use the tap-water as the water supply and can use for various water quality;

6. Double wavelength UV sterilization system can.

Automatic control by high quality PCB  

Tamper-proof water quality test probe component and All certificated by NSF

APPLICATION:

1.For making up the standard liquid in lab;

2.For physical and chemical analysis:HPLC,IC,ICP,ICP-MS,AA;

3.For life sciences:biochip,sequencing,hybridization,cataphoresis,etc;

4.For other relative production and labs. 

Product Number: Q-10C,Q-20C,Q-30C

Characteristics of Each Unit's Treatment：

1. 1. Pre-filter: Filters with a precision of 5 microns, followed by CTO filtration to remove residual chlorine and some heavy metal ions, providing effective filtration.
   
   

2. 2. RO Deionization Process: Utilizes an RO ion membrane filtration unit to remove ionic impurities, achieving a removal rate of over 99% and a water utilization rate of over 70%, compared to 30-50% for traditional processes.
   
   

3. 3. DI Ultrapure Water Column: Primarily removes ionic impurities remaining after RO filtration. The water treated by the DI purification column can achieve 

4. 
   

5. 4. UV Ultraviolet System: Uses UV light with a wavelength of 256 nm to eliminate microorganisms, bacteria, and other contaminants from the water.an online resistivity of over 18 MΩ·cm.
   

6. 
   

7. 5. Post-UF Thermal Source Filter: Not only removes bacteria from the water but also eliminates various particulate impurities, minimizing evaporation residue.
   
   

8. 6. Equipment Protection Function: When the tap water pressure is insufficient or there is a water outage, the system automatically shuts down and enters standby mode, with an indicator light activated.