Brand Name: Supsemi
Product Model: Q-10C,Q-20C,Q-30C
Product Details: Full automatic self-washing,there are three models of this machine according to their power levels,All models have an online resistivity greater than or equal to 18.2M Ω/cm.
Product Details:
1. Full automatic self-washing;
2. Cut off the water intelligently if leaking;
3. Poor water quality indication;
4. Multi-protection and two types of water connector,which could provide both Level Ⅰ water and Level Ⅲ water for labs;
5. Use the tap-water as the water supply and can use for various water quality;
6. Double wavelength UV sterilization system can.
Automatic control by high quality PCB
Tamper-proof water quality test probe component and All certificated by NSF
APPLICATION:
1.For making up the standard liquid in lab;
2.For physical and chemical analysis:HPLC,IC,ICP,ICP-MS,AA;
3.For life sciences:biochip,sequencing,hybridization,cataphoresis,etc;
4.For other relative production and labs.
Product Number: Q-10C,Q-20C,Q-30C
Size | water production | water conductivity | online resistivity | rated voltage | rated power | Note |
Q-10C | 10L/H | <300us/cm | ≥18.2MΩ/cm | 110-220V/AC | 30W | 0.833 |
Q-20C | 20L/H | <300us/cm | ≥18.2MΩ/cm | 110-220V/AC | 40W | 0.893 |
Q-30C | 30L/H | <300us/cm | ≥18.2MΩ/cm | 110-220V/AC | 50W | 0.963 |
Parameters | Configuration | ||
Equipment Name | Ultrapure Water System | TPF Pre-filter | 1 Set |
Voltage | 110-220V | CTO Fine Filter | 1 Set |
Design Water source | tap water / groundwater | 1 Micron Precision Filter | 1 Set |
Rated Inlet Pressure | 0.2-0.5MPA | RO Ion Membrane Filter | 1 Set |
Working Pressure Range | 0.6-0.8MP | 4 Units of DI Purification Columns | 1 Set |
Inlet Water Conductivity | <300us/cm | Silent Booster Pump | 1 Set |
Online Conductivity of Effluent Water | <0.0.6us/cm | Water Quality Monitoring Meter | 1 Set |
Online Conductivity of Inlet Water | >18MΩ.cm | Water Quality Alarm System | 1 Set |
Water Source Utilization Rate | >70% | Fully Automatic Control System | 1 Set |
Operating Temperature | 10-40℃ | Accessory Instrument Protection Device | 1 Set |
Post 0.01 µm Filter | 1 Set | UV Ultraviolet System | 1 Set |
Characteristics of Each Unit's Treatment:
1. Pre-filter: Filters with a precision of 5 microns, followed by CTO filtration to remove residual chlorine and some heavy metal ions, providing effective filtration.
2. RO Deionization Process: Utilizes an RO ion membrane filtration unit to remove ionic impurities, achieving a removal rate of over 99% and a water utilization rate of over 70%, compared to 30-50% for traditional processes.
3. DI Ultrapure Water Column: Primarily removes ionic impurities remaining after RO filtration. The water treated by the DI purification column can achieve
4. UV Ultraviolet System: Uses UV light with a wavelength of 256 nm to eliminate microorganisms, bacteria, and other contaminants from the water.an online resistivity of over 18 MΩ·cm.
5. Post-UF Thermal Source Filter: Not only removes bacteria from the water but also eliminates various particulate impurities, minimizing evaporation residue.
6. Equipment Protection Function: When the tap water pressure is insufficient or there is a water outage, the system automatically shuts down and enters standby mode, with an indicator light activated.
Office Photo
Exhibition
Contact: Bruce Liu
WhatsApp: +86-18059149998
Tel: +86-18059149998
Email: sales@supsemi.com
Add: Room 1402, Building 1, No. 89 Xibeilu, Xishancun, Xibei Street, Xinluo District, Longyan City, Fujian Province
We chat