Programmable Vertical Lifting Machine for Precision Dip Coating in Semiconductor Applications

Programmable Vertical Lifting Machine for Precision Dip Coating in Semiconductor Applications

Product Name: Programmable Vertical Lifting Machine for Precision Dip Coating in Semiconductor Applications

Product Model: PTL-MM02-500

Product Description: This machine utilizes a precision stepper motor with a driver to subdivide stepping angles, allowing for precise control of the lifting speed, ensuring smooth operation during the lifting process. With its compact size and user-friendly operation, it is an ideal device for coating larger samples in laboratory settings and small production workshops at room temperature.

Product Description

The PTL-MM02-500 Programmable Vertical Lifting Machine is a precision device specifically designed for researching liquid phase film growth on substrates. By vertically lifting samples immersed in liquid, a film grows on the surface of the samples.

This machine uses a precision stepper motor with a driver to subdivide stepping angles, allowing for precise control of the lifting speed and ensuring smooth operation during the lifting process. The lifting speed, immersion time of the samples in the liquid phase film materials, entry speed into the liquid, number of coating cycles, and drying time can all be controlled through the control system.

The PTL-MM02-500 Programmable Vertical Lifting Coater features a high-precision speed control system and a touchscreen for parameter input, enabling automatic control of the entire dip coating process.

Product Features:

1.This machine is designed with a high-precision speed control system.

2. It features a touchscreen for parameter settings.

3. The entire process is under automatic control.

4. It is certified with CE standards.

Product Parameters

Product Name	Programmable Vertical Lifting Machine for Precision Dip Coater in Semiconductor Applications
Product Model	PTL-MM02-500
Installation Conditions	This equipment is required to operate under the following conditions: temperature 25°C ± 15°C and humidity 55% RH ± 10% RH. 1. Water: Not required. 2. Power: AC 220V, 50Hz, must have good grounding. 3. Gas: Not required. 4. Workbench: Dimensions 800 mm x 600 mm x 700 mm, with a load capacity of over 200 kg. 5. Ventilation: Not required.
Product Parameters	1. External Power Supply: 220V (50Hz) / 110V (60Hz). 2. Operating (Up/Down) Speed: 1~500 mm/min (integer). 3. Utilizes a high-precision stepper motor. 4. Substrate Dimensions: Length 75 mm × Width 25 mm × Thickness 2.5 mm. 5. Lifting Load: Not greater than 100 g. 6. Effective Immersion Length: 60 mm. 7. Immersion and Drying Time Settings: 1-999 seconds.

Standard Accessories

Subject No.	Product name	Qty
1	Power Cable	1
2	Fixture	1
3	Loading Cup Holder	1
4	Control Box	1

Note:

The process of growing films on surfaces through lifting is a very delicate operation. When mounting and removing the substrate, hands must not touch the film growth surface.

The substrate must leave a card head (6-10 mm); for example, if the film requires 50 mm, the substrate length should be 56-60 mm. If no card head is left, a special fixture can be purchased that allows the entire substrate to be immersed in the liquid, eliminating the need to leave a card head. This fixture can only hold one substrate at a time.

If there are special requirements for the machine (such as speed, stroke, substrate size, corrosion resistance, etc.), it can be specially designed for the customer.

Office Photo

offce photo.jpg