UV ozone cleaner Ultraviolet ozone cleaning system disinfection machine Equipment for Lab

Product Description

The machine features a built-in heating element that can heat substrates, with a maximum temperature of 150°C. It utilizes PID temperature control and allows for the setting of 30-step heating and cooling programs.

Product Features

1. Small size, light weight

2. Can remove molecular level pollutants

3. Can clean various substrates

Product Parameters

Product Name	Effective Ultraviolet Cleaner UV Ozone Cleaning Machine Equipment  for Disinfection and Sterilization
Product Model	SUP-PCE-66
Main Parameters	1. Power supply: AC 220V 50Hz (110V optional) 2. Power: 750W 3. Maximum heating temperature: 150°C 4. Irradiation time setting: 0-30 min 5. Accessory: Comes standard with a quartz sample stage for placing substrates to avoid contamination 6. Quartz sample stage dimensions: 150 x 150 x 20 mm 7. Drawer box dimensions: 200 x 230 x 23 mm 8. Temperature Control System     · Includes an 858P temperature controller     · PID automatic temperature control system     · Intelligent 30-step programmable control     · Built-in overheat protection and thermocouple fault alarm     · Temperature control accuracy: ±1°C
	9. Fan · The device has an exhaust port on the back, size: φ80 mm · Comes standard with a fan installed at the exhaust port on the back of the device; the three-pin socket on the back    is the power outlet for the fan · Connect the aluminum corrugated pipe to the fan to discharge ozone outside the laboratory · Standard length of the corrugated pipe: 5 meters
	10. UV Lamp · Type: UV lamp tube · Power: 8W * 4 = 32W · Wavelength: 185 nm + 254 nm · Irradiation area: 150 x 150 mm · Light intensity: 80 µW/cm²
Product  Specifications	11. Product Specifications · Dimensions with drawer closed: Length 270 mm × Width 300 mm × Height 247 mm · D: Length 270 mm × Width 540 mm × Height 247 mm · Weight: Approximately 8.6 kg

Note:

1. The UV device should be operated or guided by qualified personnel from industrial enterprises or academic institutions.

2. Do not look directly at the illuminated UV lamp with bare eyes, as it may cause eye injury and is very dangerous.

3. O3 ozone is a pungent, irritant, and strongly oxidative gas that is harmful to health. Use it in a fume hood or well-ventilated area whenever possible.

4. Avoid using in environments with high temperatures, high humidity, dust, corrosive gases, or acidic and alkaline conditions.

5. To ensure safety, always connect the grounding wire and ensure it is secure.

6. Always turn off the power before performing cleaning or maintenance tasks.

7. Do not modify or process the device without permission; the company will not be responsible for any modified or processed equipment.

8. Use clean gloves while operating. Direct contact with the UV lamp can leave fingerprints on its surface, reducing ultraviolet transmission. If fingerprints are present, please wipe them off with a cotton cloth moistened with alcohol. (Note: The lamp is a consumable item and is not covered under warranty.)

9. When replacing the lamp, ensure the power is turned off, and wear cotton gloves while handling the lamp. (Note: Replacement should be done by qualified personnel.)

10. The quartz irradiation tube can accumulate dust on its inner and outer surfaces over time, reducing ultraviolet transmission. Please clean it regularly based on the level of contamination.

Office Photo

Exhibition