UV Ozone Cleaner Ultraviolet Ozone Cleaning System with Mixing Mechanism Disinfection Equipment for Lab

Product Name：UV Ozone Cleaner Ultraviolet Ozone Cleaning System with Mixing Mechanism Disinfection Equipment for Lab

Product Model：SUP-PCE-66-A

Product Description: The SUP-PCE-66-A is a compact UV ozone cleaning machine designed for cleaning various single crystal substrates to ensure better film quality.

It can also remove photoresist, improve the surface wettability of materials, clean SEM and TEM samples, and UV activate polymers.

Product Description

The machine features a built-in heating element that can heat substrates, with a maximum temperature of 150°C. It utilizes PID temperature control and allows for the setting of 30-step heating and cooling programs. Additionally, it includes a stirring function for surface treatment of oxides, including dry electrode battery cathode materials.

Product Features

1. Compact and lightweight

2. Capable of removing molecular-level contaminants

3. Can clean various substrates

4. Equipped with a stirring mechanism for surface treatment of battery cathode materials

Product Parameters

Product Name	UV Ozone Cleaner Ultraviolet Ozone Cleaning System with Mixing Mechanism Disinfection Equipment for Lab
Product Model	SUP-PCE-66-A
Main Parameters	1. Power supply: AC 220V 50Hz 2. Power: 550W 3. Maximum heating temperature: 150°C 4. Irradiation time setting: 1-30 min 5. Accessory：Comes standard with a round material box for placing powder samples; dimensions of the round material box: inner diameter φ140 mm × depth 14 mm

	6. UV Lamp Type: UV lamp tube Power: 8W * 4 = 32W Wavelength: 185 nm + 254 nm Irradiation area: 150 x 150 mm Light intensity: 80 µW/cm²
	7. Stirring Mechanism · The device is equipped with a stirring mechanism on the top for surface treatment of powder materials. · Stirring motor voltage and power: DC 24V, 5W · Stirring speed: adjustable from 5 to 20 rpm (adjusted using the speed knob on the front panel) · Adjustable height of the stirring rod: 22 mm · Three evenly distributed stirring blades at 120 degrees for more uniform mixing, with a stirring diameter range of ≤φ135 mm.
	8. Fan · The device has an exhaust port on the back, size: φ80 mm. · Comes standard with a fan installed at the exhaust port on the back of the device; the three-pin socket on the back serves as the power outlet for the fan. · Connect the aluminum corrugated pipe to the fan to discharge ozone outside the laboratory or to a fume hood. · Standard length of the corrugated pipe: 5 meters. Fan Specifications · Model: HF-75 · Air pressure: 150 Pa · Power: 35 W · Airflow: 220 m³/h · Voltage: AC 220V/50Hz · Noise level: 31 dB · Speed: 2600 r/min · Diameter: 72 mm
	9. Temperature Control and Heating System 1. A W-shaped stainless steel heating element is arranged at the bottom of the substrate stage. 2. Heating element power: 450 W, maximum heating temperature: 150°C, power supply voltage: AC 220V. 3. Includes a 708 temperature controller. 4. PID automatic temperature control system. 5. Intelligent 30-step programmable control. 6. Built-in overheat protection and thermocouple fault alarm. 7. Temperature control accuracy: ±1°C.
Product Specifications	10. Product Specifications · Dimensions: Length 265 mm × Width 563 mm × Height 419 mm (width includes the fan, height includes the stirring motor) · Weight: Approximately 11 kg

Note:

1. The UV device should be operated or guided by qualified personnel from industrial enterprises or academic institutions.

2. Do not look directly at the illuminated UV lamp with bare eyes, as it may cause eye injury and is very dangerous.

3. O3 ozone is a pungent, irritant, and strongly oxidative gas that is harmful to health. Use it in a fume hood or well-ventilated area whenever possible.

4. Avoid using in environments with high temperatures, high humidity, dust, corrosive gases, or acidic and alkaline conditions.

5. To ensure safety, always connect the grounding wire and ensure it is secure.

6. Always turn off the power before performing cleaning or maintenance tasks.

7. Do not modify or process the device without permission; the company will not be responsible for any modified or processed equipment.

8. Use clean gloves while operating. Direct contact with the UV lamp can leave fingerprints on its surface, reducing ultraviolet transmission. If fingerprints are present, please wipe them off with a cotton cloth moistened with alcohol. (Note: The lamp is a consumable item and is not covered under warranty.)

9. When replacing the lamp, ensure the power is turned off, and wear cotton gloves while handling the lamp. (Note: Replacement should be done by qualified personnel.)

10. The quartz irradiation tube can accumulate dust on its inner and outer surfaces over time, reducing ultraviolet transmission. Please clean it regularly based on the level of contamination.

Office Photo

offce photo.jpg