Horizontal Flash Sintering Furnace Max 1600C with 3KW Programmable Power Source

Product Name: Horizontal Flash Sintering Furnace Max 1600C with 3KW Programmable Power Source

Product Model: GSL-1600X-FS3KW

Product Description: GSL-1600X-FS3KW is a horizontal tube furnace with a 3KW programmable AC power source designed for exploring the flash- sintering for ceramic materials at a lower cost. The tube furnace comes with an 80mm OD alumina tube and a sliding sample fixture, which can preheat sample up to 1600C.

Product Description

GSL-1600X-FS3KW is a horizontal tube furnace with a 3KW programmable AC power source designed for exploring the flash- sintering for ceramic materials at a lower cost. The tube furnace comes with an 80mm OD alumina tube and a sliding sample fixture, which can preheat sample up to 1600 C.

The Sample holder will press electric wire to the sample via a ceramic screw to pass through a programmable AC power source which is programmable up to 1500W power.

Flash-sintering is a new technology that is used widely in the research of solid-state electrolyte, SOFC, and magnetic & Thermo-electric materials.

Product Parameters

Product Name	Horizontal Flash Sintering Furnace Max 1600C with 3KW Programmable Power Source
Model	GSL-1600X-FS3KW
Tube structure	- 208 - 240 VAC, 50/60Hz, 5.2 KW max. power consumption - Working temperature: 1600°C continuous and 1700°C Max. - Heating Zone length: 18" ( 457 mm ) - Constant temperature zone: 6" ( 150 mm) within +/- 1°C - One pcs of High purity Alumina tube with dimension: 2 3/8"x 40"(60OD x 54IDx 1000mm L is included.The alumina tube is consumable and no warranty covered.)
Temperature Control	- PID automatic control via solid-state relay with 30 steps programmable and +/-1°C accuracy - Built-in Over Temperature and Thermocouple Failure Protection - B-type thermal couple
Vacuum Sealing Flanges & Sample Fixture	Vacuum Flanges are made of stainless steel which can reach the vacuum to 10-2 torr by mechanical pump and 10-5 torr by turbopump. (Please check the installation instruction at the Operation Video column) Left Side Flange: - 30 mm dia. quartz observation window - Needle valve with 1/4 NSP connector Right Side Flange： - KF25 vacuum port to connect to a vacuum pump - Two electric wires feed through. Wires are made of Platinium with 1 mm diameter - Needle valve with mechanical vacuum gauge. - The sample fixture is built-in in the inside flange. - This flange is slidable to make sample loading easy.
Programmable AC Power Source	The programmable AC power source is to connect the electric wire at the feedthrough at the right side flange. After pre-heating, AC power will pass a sample as a program set to produce more heat rapidly, which results in a sample sintered in high density. The power parameters can be set via included laptop. Power source specifications ae as the below - Input Voltage: AC220V±10%, 50/60Hz， single phase - Power Capacity: 3000 W Max. - Circuit Type: IGBT, PWM - Output Voltage： 50V-300V adjustable with ≤1% stability - Output Frequency: 50/60Hz fixed with ≤0.01% stability - Protection: Overload, over-temperature, and short circus - PC programmable： Laptop with pre-installed software is included for program setting - Optional: DC power source 400V/10A is available upon request at the extra cost
Compliance	CE Certified NRTL (UL61010) or CSA certification is available upon request at extra cost.
Dimensions	Dimensions：1950L×500 W ×720 H, mm Weight: 148 Kg
Warranty	One year limited with lifetime support. ( Consumable parts such as quartz tube and heating lamps are not covered by the warranty)