UV Release Film Low Tack Protective Film Tape

Brand: SupSemi

Model: UV406F

Description: UV406F is a cohesive UV release protective film that features good initial tack. After UV exposure, the adhesive significantly reduces, allowing for easy peeling without residue or burrs.

UV406F is a cohesive UV release protective film that features good initial tack. After UV exposure, the adhesive significantly reduces, allowing for easy peeling without residue or burrs.

Product Structure：

Product Features:

1. Excellent weather resistance.

2. Instant bonding strength is good, and the components are easy to remove without residual adhesive after UV debonding.

3. Compliant with ROHS requirements.

Product Application:

The product can be applied for cutting and positioning protection of various silicon wafers, glass, ceramic capacitors, and PCB boards.

Product Parameters:

Test project		Measurement standards
substrate thickness		150±5
Product thickness (excluding release film) (μ m)		170±10
180 ° peel force (gf/25mm)	Before UV irradiation	≥800
180 ° peel force (gf/25mm)	After UV irradiation	＜15
Tensile strength (MPa)	MD	＞20
Tensile strength (MPa)	TD	＞20
Elongation rate (%)	MD	＞500
Elongation rate (%)	TD	＞500

Storage Method:

Storage Conditions: Store in a dark, opaque environment at 10-30 ℃ with a relative humidity of 40-70%. The shelf life is 6 months.

Precautions:

The product should be kept away from heat sources and open flames.

The surface of the items to be adhered should be clean, dry, and free of grease or other contaminants.

The product is not suitable for outdoor use; avoid exposure to outdoor weather conditions that may affect the tape's performance and leave residue on the adhered surface.

UV Release Film.jpg