Welcome: Supsemi Electronic Technology Co., Ltd
sales@supsemi.com +86-18059149998

Compact Automatic Flammable Gas Control and Disposal Device for Laboratory with Hydrogen Gas Detector

Product Name: Compact Automatic Flammable Gas Control and Disposal Device for Laboratory with Hydrogen Gas Detector

Product Model: GSL-KR100

Product Description: GSL-KR100 is a combustion gas module to dispose of residual flammable gas via a self-ignition heating coil. It is designed to pair with any SUPSEMI tube and atmosphere furnaces.

EMAIL

Product Description

GSL-KR100 is a combustion gas module to dispose of residual flammable gas via a self-ignition heating coil. It is designed to pair with any SUPSEMI tube and atmosphere furnaces. It can also control the gas flow rate and communicate with a Honeywell hydrogen gas detector. It is a good choice for experiments under a reducing environment, such as hydrogen flow. The device also has an RJ45 ethernet port for remote control and monitoring. 

Product Parameters

Power• 200W
Voltage• 110V, 208-240VAC, single phase, 50-60Hz
Features

• Applicable to dispose of various residual flammable gas along the exhaust line (designated gas needs to be discussed with SUPSEMI in advance).

• Compact, modularized, and compatible with various SUPSEMI furnaces. 

• Interlocks: in case of emergency, the gas flow and furnace heating will be cut off. 

a flammable gas leak is detected

• Failure of a self-ignition heating coil

• Overpressure

• Out of flammable gas flow. 

• One check valve to prevent gas backflow. 

• Two solenoid valve allows users to choose the flow type, inert or flammable. 

• One mass flow controller, 0-1000 sccm. 

• Double explosion protection: Pressure sensor and mechanical pressure relief valve. 

• Constant pressure mode. 

• Automated hydrogen treatment. 

• Remote control, data monitoring, and log. 

• Furnace tube gas purging.

Flow rate• 0-1000 sccm
Gas Inlets• Two 1/4" compression tube fittings for both inert and flammable gas.

Hydrogen Gas 

Detector

• The hydrogen gas detector is connected to the control box. The alarm is preset at 20% LEL for hydrogen. 

• If alarmed, the hydrogen gas flow and furnace heating function will be cut off. 

PC Control

• All operations need to be completed on the host computer

• Manual purging and automatic purging modes are available

• Constant pressure sintering mode: During the heating process, the control system will automatically adjust the air intake and output to keep the heating furnace in a slightly positive pressure state. (Range: 100,000pa-115,000pa)

Over Pressure 

Protection

The electronic pressure transmitter will turn on the exhaust valve to accelerate the exhaust if the set pressure reached

Mechanical overpressure exhaust valve (0.4 bar relative pressure)

Dimension500L × 450W × 750H (mm)
Net Weight15kg
WarrantyOne-year limited warranty (The warranty does not cover consumable parts such as heating elements, processing tubes, and o-rings, please order the replacement at related products from supsemi.com)

Flammable Gas Control and Disposal Device.jpg


Flammable Gas Control and Disposal Device with PC.jpg

Office Photo

offce photo.jpg

Exhibition

Exhibition.png

Cooperative Partner.jpg

INQUIRY