Compact Auto-Sliding RTP Tube Furnace with Tube and Flanges 1200°C Max

Furnace Structure

1. Double-layer steel structure with dual air cooling fans 

2. One pair of sliding rails is installed on the bottom of the furnace, which allows the furnace to be manually moved from side to side

3. Vacuum flanges and a vacuum gauge are installed for immediate use.

Power

1.5 KW

Voltage

Furnace: AC 208V~240V Single Phase, 50/60 Hz

Sliding Mechanism: AC 208V~240V Single Phase, 50/60 Hz

Max. Temperature

1200°C (<1 hour) with flowing gas

1100°C

Heating& Cooling Rates

Heating Rate:

 15°C/sec (RT - 150°C);

 10°C/sec (150°C - 250°C);

  7°C/sec (250°C - 350°C);

  4°C/sec (350°C - 500°C);

  3°C/sec (500°C - 550°C);

  2°C/sec (550°C - 650°C);

  1°C/sec (650°C - 800°C);

 0.5°C/sec (800°C - 1000°C);

Cooling Rate:

15°C/sec (1000 - 950°C);

10°C/sec (950°C - 900°C);

7°C/sec (900°C - 850°C);

4°C/sec (850°C - 750°C);

2°C/sec (750°C - 600°C);

1.5°C/sec (600°C - 500°C);

1°C/sec (500°C - 400°C);

0.5°C/sec (400°C - 300°C);

Note: The max heating and cooling rate is achieved by pre-heat one side of the processing tube to the target temperature and then slide the furnace to the other side. You may choose to place the sample in the pre-heat area or not.

Heating Zone Length

8" (200mm), single zone. The following picture shows the temp. distribution across the heating zone.

Constant Temperature 

Zone

2.3" (60mm)  (+/-1°C) @ 1000 °C

Temperature Controller

& Sliding Control

1. 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.

2. Built-in over-temperature alarm and protection allow for operation without an attendant.

3. A k-type thermal couple is built in the furnace to control the furnace temperature

4. Sliding is driven by an electric motor by touch button.

Double sliding rail made by Cr-plated steel

Sliding length: 1200 mm

Dimensions: 1200L x 400 W x  500 H, mm

Weight: 85 Kg

One year limited manufacturer's warranty (Consumable parts such as processing tubes, O-rings and heating elements are not covered by the warranty, please order replacements at related products below).