Ultrafast Heating & Pressing Furnace (UHP) with Ultra High Vacuum for Lab

Ultrafast Heating & Pressing Furnace (UHP) with Ultra High Vacuum for Lab

Product Name: Ultrafast Heating & Pressing Furnace (UHP) with Ultra High Vacuum for Lab

Product Model: RTP-MS

Product Description: RTP-MS is an Ultrafast Heating Pressing Furnace ( UHP) ) with a heating speed of more than 200oC/minute up to 2900°C and Max. 500 kg Load inside an ultra-high vacuum chamber made of stainless settle. The furnace may replace SPS for small sample at a low cost.

Product Description

RTP-MS is an Ultrafast Heating Pressing Furnace ( UHP) ) with a heating speed of more than 200oC/minute up to 2900°C and Max. 500 kg Load inside an ultra-high vacuum chamber made of stainless settle. The furnace may replace SPS for small sample at a low cost.

Product Features

1. Stainless steel vacuum chamber with a water-cooling jacket that enables it to reach 10-7 torr

2. Two types of graphite die and the crucible are included for pressing pellets up to 2900oC @ 50 MPa, and sintering powder or sheet at 2900oC without pressure.

3. The digital load cell is built to control loading pressure

4. The IR temperature sensor is included for digital temperature control

Product Parameters

Product Name	Ultrafast Heating & Pressing Furnace (UHP) with Ultra High Vacuum for Lab
Model	RTP-MS
Graphite Heater	1. Two sets of 2" graphite heaters are included, as shown in picture left -Pellet die heater: 10 mm ID, 60 MPa -Crucible type heater: 33 mm ID with lid 2. The customized heater is available upon request
Working Temperature	Max. working Temperature: 2900°C Max. Max. working time: 120 minutes Max. Max. Heating Rate: 200oC/ Second
Max. Temperature	2900ºC (30 seconds Max.)
Max. Heating Rate	<= 200 °C/ second
Pressing Pressure	1. A movable rod with Vacuum sealed is installed on the top flange of the vacuum chamberPushing rod travel distance: 60 mm 2. Two ceramic plates will be pressed on the graphite heater 3. An electric motor-driven top rod to apply pressure to graphite pellet die with a precision load sensor 4. Max. loading force is 500 Kg with accuracy+/- 0.5 kg
Temperature Control	1. A digital IR temperature sensor made in Germany is built in with a laser point (1) Manual heating with IR temperature display to achieve max heating rate ( ~ 200℃/S) (2) Programmable temperature control by IR sensor and digital display 2. Eurotherm 3000 temperature controller provides a 24-segment program and +/- 1℃ accuracy
Dimensions	Weight: 400kg
Upgraded Option	This furnace can be upgraded to an automatic version with sample loading and unloading via a robotic arm.