Welcome: Supsemi Electronic Technology Co., Ltd
sales@supsemi.com +86-18059149998

Ni-Based Superalloy Hydrogen Tube Furnace 1100C Max With Hydrogen Detector

Product Name: Ni-Based Superalloy Hydrogen Tube Furnace 1100C Max With Hydrogen Detector

Product Model: OTF-1200X-60HG

Product Description: The tube furnace is designed for processing material under hydrogen gas up to 1100°C safely. Also, the furnace can be used for all kinds of inert gasses and oxygen gas up to 30 PSI. The precision temperature controller is a 30-segment programmable.

EMAIL

Product Description

OTF-1200X-60HG is a safe hydrogen tube furnace The processing tube is made of high-quality Ni-based superalloy which never cracks and breaks at flowing Hydrogen gas. One 3M hydrogen detector is included which will shut down the Hydrogen gas generator and gas inlet valve immediately once detecting hydrogen gas leaking.


Product Parameters

 Furnace Structure

• Double layer steel casing with air cooling to keep furnace surface temperature lower than 60°C. 

• High-purity fibrous alumina insulation for Max. energy saving.

• A hydrogen detector and solenoid valve are included for safe operation

• The hydrogen gas furnace must be placed under a fume hood which is not included.

Power

• 3 KW Max. ( 20A breaker required)  

Voltage

• AC 208-240 Single Phase, 50/60 Hz

Max. Temperature

1100°C  ( < 1 hour )

 Continuous 

Temperature

1000°C

Max. Heating Rate

 <= 20°C /min


Processing Tube

• Material: Nickel-based super-alloy seamless tube with max. 1200°C working temperature  

• Tube Size: OD 60 x ID 52 x Length 1000 (mm)

Heating Zone length

• 440 mm (single zone)

Constant temp. zone

• 150  mm (+/-1°C)

Temperature controller

• PID automatic control with 30 segments programmable 

• Automatic over-temperature and thermal broken protection

• RS485 Communications Port.

Temperature Accuracy+/ - 1°C

Flanges and 

Gas Inlet

• Two sets of CF-63 flanges are welded on two ends of the tube which allow high vacuum up to 10E-5 torr and 30 PSI positive pressure

• One solenoid valve is installed on the left of the flange for the Hydrogen gas inlet. It connects with a hydrogen detector.  Once a hydrogen gas leak is detected ( 10% below the hydrogen explode point ), gas inlet valve will be shut down immediately.

• One pressure gauge is installed on the end of the gas inlet.  Hydrogen gas pressure must be controlled under 5 PSI, which can be adjusted by a stainless steel needle valve.

Flanges and Gas Inlet.jpg

Gas-outlet & 

Flow meter 

• One 16 -160 ml/min floating meter is installed on gas-outlet end for adjusting the gas flow rate.

• 1/4" Dia stainless steel tube is installed for burning hydrogen gas during gas flowing.

• One long lighter is included in the standard package for igniting hydrogen gas manually.

• One 6" long neck flexes safe lighter is included for lighting hydrogen gas.

Hydrogen 

Detector System

• One Honeywell UL Approved Sensepoint Gas Detector is Integrated into the system.

• Working Temperature Range:   40ºF to +149ºF (-40ºC to +65ºC)

• Alarm Point: H2 Limited Explosive Line 20% (20% LEL).  

• Once detecting H2 gas beyond the point, it will shut off the inlet valve to the H2 automatically.

Furnace Dimension550 x 380 x 520 mm
Net Weight
50kg
Warranty

One-year limited warranty for electrical and mechanical parts.  (Consumable parts such as sample plates and heating elements are not covered by the warranty, please order the replacement for related products below.)

ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of SUPSEMI One Year Limited Warranty.

Hydrogen Tube Furnace.png

Office Photo

offce photo.jpg

Exhibition

Exhibition.png

Cooperative Partner.jpg

INQUIRY